| 244 | Adnan Mumtaz, Mohammad Abu Shahzer, Min-Su Rho, Yong-Un Lee, Young-Seok Choi, Jin-Hyuk Kim | 2024 | Design and CFD analysis of 3 kW EC fan impeller for various speed | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Phoenix, Jeju | 20204 | |
| 243 | Hyeon-Mo Yang, Dae-Hyoun-Eom, Jum-Beom Kim, Kyoung-Yong Lee, Ju-Taek Chung, Young-Seok Choi | 2024 | Analysis of flow characteristics by partial load in turbomachinery and control to avoid abnormal flow using variable control technology | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Phoenix, Jeju | 20706 | |
| 242 | Dae-Hyoun-Eom, Yong-Jin Son, Hyeon-Mo Yang, Young-Seok Choi, Kyoung-Yong Lee | 2024 | Numerical Analysis of Straightener Flow Characteristics of Duct-type Blower Test Device | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Alpensia, Pyeongchang | 10102 | ▷ |
| 241 | Yong-Jin Son, Dae-Hyoun-Eom, Hyeon-Mo Yang, Kyoung-Yong Lee, Joonyong Yoon, Young-Seok Choi | 2024 | Energy-Saving Operation Scenario of Axial Flow Pumps according to Flow Control Methods | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Alpensia, Pyeongchang | 10526 | ▷ |
| 240 | Yong-Jin Son, Yong-In Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Joonyong Yoon, Young-Seok Choi | 2023 | Effect of Absolute Flow Angle at the Inlet of Axial Pump on the Slopes of Performance Curve and Unstable Flow Phenomena in Low Flow Rates | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | ICC, Jeju | 362-369 | ▷ |
| 239 | Hyeon-Mo Yang, Yong-Jin Son, Kyoung-Yong Lee, Seungkyung Park, Young-Seok Choi | 2023 | Analysis of energy consumption reduction in turbomachinery applying variable control technology | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | ICC, Jeju | 430-431 | ▷ |
| 238 | Yong-Jin Son, Yong-In Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Joonyong Yoon, Young-Seok Choi | 2023 | A Numerical Study on the Hydrodynamic Performance Characteristics with Various Inlet Flow Direction of an Axial Flow Pump | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Alpensia, Pyeongchang | 602-603 | ▷ |
| 237 | Hyeon-Mo Yang, Yong-Jin Son, Yong-In Kim, Kyoung-Yong Lee, Seungkyung Park, Young-Seok Choi | 2023 | Analysis of energy consumption of the axial-flow fan applying operational scenario | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Alpensia, Pyeongchang | 152-153 | ▷ |
| 236 | Yong-Jin Son, Yong-In Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Joonyong Yoon, Young-Seok Choi | 2022 | A Numerical Investigation of Performance Characteristics of Axial Flow Pump with Various Inlet Flow Angles | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Shinhwa World, Jeju | 489-490 | ▷ |
| 235 | Hyeon-Mo Yang, Yong-Jin Son, Yong-In Kim, Kyoung-Yong Lee, Seungkyung Park, Young-Seok Choi | 2022 | Analysis of energy consumption of the axial-flow pump simulating variable inlet guide vane | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Shinhwa World, Jeju | 207-208 | ▷ |
| 234 | Yong-In Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi | 2022 | A Numerical Study on Effective Variable Range for Performance of the Anti-Stall Fin | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Shinhwa World, Jeju | 100-101 | ▷ |
| 233 | Hyeon-Mo Yang, Yong-In Kim, Yong-Jin Son, Kyoung-Yong Lee, Young-Seok Choi | 2022 | Analysis of energy consumption of the axial-flow pump applying operational scenario | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 272-273 | ▷ |
| 232 | Yong-In Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi | 2022 | Transient Analysis of Internal Flow Patterns in an Axial Fan with the Anti-stall Fin | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 66-67 | ▷ |
| 231 | Yong-In Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi | 2021 | A Study on Suppression of Recirculating and Reattaching Flow at Low Flow Rates of a Mixed-flow Pump | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Phoenix, Jeju | 436-437 | ▷ |
| 230 | Yong-Jin Son, Hyeon-Mo Yang, Kyoung-Yong Lee, Joon-Yong Yoon, Young-Seok Choi | 2021 | Performance Prediction of Centrifugal Compressor Diffuser for R718 Refrigerant | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Phoenix, Jeju | 308-309 | ▷ |
| 229 | Young-Seok Choi, Jun-Won Suh, Kyoung-Yong Lee, Hyeon-Mo Yang | 2021 | Analysis of operational scenarios for sites where variable fluid machinery will be applied | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Phoenix, Jeju | 205-206 | ▷ |
| 228 | Yong-In Kim, Yong-Uk Choi, Cherl-Young Jeong, Kyoung-Yong Lee, Young-Seok Choi | 2021 | Design and Application of Two- and Three-Dimensional Guide Vanes for a Wall-mounted Axial Flow Fan | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 309-310 | ▷ |
| 227 | Yong-In Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi | 2021 | Analysis of Cavitation Characteristics of a Mixed-flow Pump with Different Aspect Ratio of Impeller Leading Edge | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 233-234 | ▷ |
| 226 | Yong-In Kim, Sang-Yeol Lee, Hyeon-Mo Yang, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2021 | Numerical Study on Application of Two-Dimensional Plate as an Anti-Stall Device for an Axial Flow Fan | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 197-198 | ▷ |
| 225 | Jun-Won Suh, Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi | 2020 | A numerical investigation of cryogenic cavitating flow in the ogive and inducer | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 275-276 | ▷ |
| 224 | Yong-In Kim, Won-Jae Suh, Yong-Uk Choi, Cherl-Young Jeong, Kyoung-Yong Lee, Young-Seok Choi | 2020 | Numerical Study on Performance Characteristics of a Wall-mounted Axial Fan with Variation of the Setting Angle | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 249-250 | ▷ |
| 223 | Yong-In Kim, Chan Lee, Young-Seok Choi | 2020 | Numerical Study on Performance and Non-uniform Pressure Distribution of an Axial Fan with Difference of the Blade Trailing Edge Thickness | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 182-183 | ▷ |
| 222 | Yong-In Kim, Hyeon-Mo Yang, Sang-Yeol Lee, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2020 | Numerical Study on Stall Characteristics of an Axial Fan in the Range of Low Flow Rate | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 178-179 | ▷ |
| 221 | Yong-Jin Son, Yong-In Kim, Jeoung-Hun Kim, Woo-Heon Lee, Kyoung-Yong Lee, Joon-Yong Yoon, Young-Seok Choi | 2020 | A Study on Design and Application of a Centrifugal Fan for Improving the Performance of Standard Air Purifier | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 108-109 | ▷ |
| 220 | Yong-In Kim, Yong-Kab Lee, Kyoung-Yong Lee, Young-Seok Choi | 2020 | Design for a Mixed-flow Pump Impeller with Improved Saddle Characteristics in the Range of Low Flow Rate | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 78-79 | ▷ |
| 219 | Yong-In Kim, Bo-Min Cho, Yong-Hoon Lee, Yong-Kab Lee, Kyoung-Yong Lee, Young-Seok Choi | 2020 | Compact Design for a Mixed-flow Pump Diffuser with Optimized Database at Various Specific Speeds using HEEDS and CFX: Application for Axial and Radial Direction | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 18-19 | ▷ |
| 218 | Jun-Won Suh, Won-Gu Joo, Jungwan Park, Young-Seok Choi | 2020 | A comparative study of the scale-effect on the S-shaped characteristics of a pump-turbine unit | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 13-14 | ▷ |
| 217 | Yong-Jin Son, Hyeon-Mo Yang, Kyoung-Yong Lee, Joon-Yong Yoon, Young-Seok Choi | 2020 | Performance Prediction of Similarity for R718 Compressor | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 352-353 | ▷ |
| 216 | Jun-Won Suh, Young-Seok Choi, Won-Gu Joo | 2020 | Hydrodynamic Characteristics in the Unstable Operating Range of a Pump-Turbine Unit | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | KSFM2020-13401 | ▷ |
| 215 | Jun-Won Suh, Seung-Jun Kim, Jin-Hyuk Kim, Kyoung-Yong Lee, Young-Seok Choi | 2020 | Introduction of Research Trend in Korea Institute of Industrial Technology | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | KSFM2020-12209 | ▷ |
| 214 | Yong-In Kim, Sung Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi | 2020 | Numerical Study on Unsteady Characteristics in the Suction Performance Test of Mixed-flow Pumps | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 358-359 | ▷ |
| 213 | Yong-In Kim, Yong-Kab Lee, Kyoung-Yong Lee, Young-Seok Choi | 2020 | Compact Design for a Mixed-flow Pump Diffuser with Optimized Database at Various Specific Speeds using HEEDS and CFX | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 228-229 | ▷ |
| 212 | Yong-In Kim, Seul-Gi Lee, Yong-Jin Son, Jeoung-Hun Kim, Woo-Heon Lee, Kyoung-Yong Lee, Young-Seok Choi | 2020 | A Study on Application and Evaluation of a Centrifugal Fan for Improving the Performance of Household Air Purifier | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 74-75 | ▷ |
| 211 | Yong-In Kim, Sang-Yeol Lee, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2020 | Numerical Study on Trajectory of Tip Leakage Vortex with Variation of the Blade Thickness Profile in an Axial Fan | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 18-19 | ▷ |
| 210 | Sung Kim, Sang-Bum Ma, Young-Seok Choi, Jin-Hyuk Kim | 2020 | Design Optimization for Performance Improvement of 2 Vane Pump Impeller | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | KSFM2020-10507 | ▷ |
| 209 | Seung-Jun Kim, Young-Seok Choi, Jin-Hyuk Kim | 2020 | A Numerical Study on Unsteady Flow Characteristics in Runner and Draft Tube at Off-Design Conditions of Francis Type Hydraulic Turbines | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | KSFM2020-13402 | ▷ |
| 208 | Seung-Jun Kim, Young-Seok Choi, Yong Cho, Jong-Woong Choi, Jung-Jae Hyun, Won-Gu Joo, Jin-Hyuk Kim | 2020 | Vortex Characteristics on the Anti-Cavity Fins in Draft Tube of a Francis Turbine Model | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | KSFM2020-12510 | ▷ |
| 207 | Sang-Bum Ma, Sung Kim, Young-Seok Choi, Dong-An Cha, Jin-Hyuk Kim | 2020 | Design of an Inlet Guide Vane and Runner for Developing a 2.5 kW Class Micro Hydraulic Turbine | The Korean Society for New and Renewable Energy (KSNRE) Spring Conference | Paradise Hotel, Busan | O-HP-02 | ▷ |
| 206 | Seung-Jun Kim, Young-Seok Choi, Yong Cho, Jong-Woong Choi, Jung-Jae Hyun, Won-Gu Joo, Jin-Hyuk Kim | 2020 | A Study on the Numerical Grids through Grid Convergence Index Method in a Francis Turbine Model | The Korean Society for New and Renewable Energy (KSNRE) Spring Conference | Paradise Hotel, Busan | O-HP-01 | ▷ |
| 205 | Sang-Bum Ma, Sung Kim, Young-Seok Choi, Dong-An Cha, Jin-Hyuk Kim | 2020 | Parametric Study of 2.5kW Class Propeller Type Micro Hydraulic Turbine | National Congress of Fluids Engineering (NCFE, 11th) | Ramada Plaza, Jeju | P43 | |
| 204 | Sung Kim, Sang-Bum Ma, Young-Seok Choi, Jin-Hyuk Kim | 2020 | Effect of Impeller Geometrical Parameter on the Performance of 2 Vane Pump | National Congress of Fluids Engineering (NCFE, 11th) | Ramada Plaza, Jeju | P22 | |
| 203 | Seul-Gi Lee, Yong-In Kim, Hyeon-Mo Yang, Sung Kim, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2019 | A Study on the Effect of Tip Clearance on the Performance of an Axial Flow Fan | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Oriental Hotel, Jeju | 149-150 | ▷ |
| 202 | Yong-Jin Son, Hyeon-Mo Yang, Jin-Hyuk Kim, Kyoung-Yong Lee, Doo-Ha Kim, Joon-Yong Yoon, Young-Seok Choi | 2019 | Comparative Analysis of Flow and Temperature Characteristics in the Communication Base Station According to the Operating Conditions of Air Conditioner and Fan | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Oriental Hotel, Jeju | 115-116 | ▷ |
| 201 | Yong-In Kim, Seul-Gi Lee, Sang-Yeol Lee, Sung Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2019 | A Numerical Study on the Effects of Blade Angle and Chord Length on the Aerodynamic Performance of an Axial Fan | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Oriental Hotel, Jeju | 147-148 | ▷ |
| 200 | Sung Kim, Young-Seok Choi, Hyo-Young Kim, Tae-Gon Kim, Seok-Woo Lee, Jin-Hyuk Kim | 2019 | A Numerical Study on the Improved Suction Performance of Composite Head for Compound Processing Machine | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Oriental Hotel, Jeju | 283-284 | ▷ |
| 199 | Sung Kim, Young-Seok Choi, Jin-Hyuk Kim | 2019 | A Numerical Study on the Flow Characteristics and Performances of a Single-channel Pump | The Korean Society of Mechanical Engineers (KSME) Conference | International Convention Center, Jeju | We16B003 | ▷ |
| 198 | Sung Kim, Young-Seok Choi, Jin-Hyuk Kim, Hyo-Young Kim, Tae-Gon Kim, Seok-Woo Lee | 2019 | A Numerical Study on the Flow Characteristics of Composite Head for Compound Processing Machine for CFRP Dust Removal | The Korean Society for Precision Engineering (KSPE) Spring Conference | Changwon Exhibition Convention Center, Changwon | 19AOS067 | ▷ |
| 197 | Seul-Gi Lee, Yong-In Kim, Hyeon-Mo Yang, Sung Kim, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2019 | A Study on Aerodynamic Performance of an Axial Fan with Geometrical Parameters of Hub Cap and Tail Cone | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 210-211 | ▷ |
| 196 | Yong-Jin Son, Sung Kim, Seul-Gi Lee, Kyoung-Yong Lee, Hack-Won Hwang, Min-Ho Jeon, Joon-Yong Yoon, Young-Seok Choi | 2019 | Analysis of Flow Characteristics in a Semiconductor Chip Test Chamber | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 30-31 | ▷ |
| 195 | Yong-In Kim, Seul-Gi Lee, Sang-Yeol Lee, Hyeon-Mo Yang, Sung Kim, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2019 | A Numerical Study on Performance of an Axial Fan with the Streamwise Position of Maximum Airfoil Thickness | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 208-209 | ▷ |
| 194 | Seung-Jun Kim, Jun-Won Suh, Young-Seok Choi, Jungwan Park, Jin-Woo Yang, No-Hyun Park, Hyun-Seok Kim, Jin-Hyuk Kim | 2019 | A Study on the Flow Characteristics at Turbine Mode of a Pump-turbine under Low Flow Rate | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 191-192 | ▷ |
| 193 | Seung-Jun Kim, Young-Seok Choi, Yong Cho, Jong-Woong Choi, Jin-Hyuk Kim | 2019 | Vortex Cavitation Characteristics on the Runner Blade Thickness of a Francis Hydro Turbine Model | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 20-21 | ▷ |
| 192 | Jun-Won Suh, Young-Seok Choi, Jin-Hyuk Kim, Jungwan Park, Won-Gu Joo | 2019 | Analysis of Performance Characteristics of Real and Reduced Scale model in Turbine Transition Region of Pump-turbine for Pumped Storage | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 247-248 | ▷ |
| 191 | Jun-Won Suh, Seung-Jun Kim, Jin-Hyuk Kim, Won-Gu Joo, Jungwan Park, Young-Seok Choi | 2019 | A Study on the Performance Characteristic According to the Interface Conditions in Pump Mode of Pump-turbine for Pumped Storage | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 245-246 | ▷ |
| 190 | Hyeon-Mo Yang, Arihant Sonawat, Seung-Jun Kim, Young-Seok Choi, Kyung-Min Kim, Jin-Hyuk Kim | 2019 | Hydraulic Performance Test Evaluation of a Positive Displacement Turbine Used for Heat Pipeline | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Phoenix, Pyeongchang | 113-114 | ▷ |
| 189 | Arihant Sonawat, Seung-Jun Kim, Young-Seok Choi, Hyeon-Mo Yang, Kyung-Min Kim, Yong-Kab Lee, Jin-Hyuk Kim | 2019 | Cause of Flow Pulsations in the Positive Displacement Hydraulic Turbine Used for Heat Pipeline | The Korean Society for New and Renewable Energy (KSNRE) Spring Conference | Haeundae Grand Hotel, Busan | | ▷ |
| 188 | Seung-Jun Kim, Young-Seok Choi, Yong Cho, Jong-Woong Choi, Jin-Hyuk Kim | 2019 | Inter-Blade Vortex Characteristics on the Blockage Ratio of Runner Blade in a Francis Hydro Turbine Model | The Korean Society of Mechanical Engineers (KSME) Spring Conference | Saint John’s Hotel, Gangneung | 141-142, 19FE-TH04B01 | ▷ |
| 187 | Han-Sol Kim, Sang-Bum Ma, Young-Seok Choi, Kyoung-Yong Lee, Kwang-Yong Kim, Jin-Hyuk Kim | 2018 | Design Optimization for Securing the Cross-Sectional Area of a Single-Channel Pump Considering Solid Matter Size | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 413-414 | ▷ |
| 186 | Jin-Hyuk Kim, Bo-Min Cho, Sung Kim, Yong-Kab Lee, Young-Seok Choi | 2018 | Steady and Unsteady Flow Characteristic Analyses of a Three-Stage Centrifugal Pump | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 311-312 | ▷ |
| 185 | Seung-Jun Kim, Jun-Won Suh, Young-Seok Choi, Jungwan Park, Jin-Woo Yang, No-Hyun Park, Hyun-Seok Kim, Jin-Hyuk Kim | 2018 | A Study on the Inter-blade Vortex Cavitation Characteristics at Turbine Mode of a Pump-turbine for Pumped Storage | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 167-168 | ▷ |
| 184 | Seul-Gi Lee, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2018 | A Numerical Study of the Effect on Performance of an Axial Fan with Inlet Hub cap Shape | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 151-152 | ▷ |
| 183 | Yong-In Kim, Seul-Gi Lee, Sung Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi | 2018 | Optimization of Axial Fan Blade and Guide Vane for Underground Ventilation | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 149-150 | ▷ |
| 182 | Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi, Seon-Chang Kim | 2018 | Performance Prediction of Compressor using Natural Refrigerant (R-718) | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 93-94 | ▷ |
| 181 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2018 | Development of Design Program for Centrifugal and Mixed-flow Pump(Ns 150-1200) | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 79-80 | ▷ |
| 180 | Won-Gu Joo, Jun-Won Suh, Moo-Sung Kim, Jin-Hyuk Kim, Young-Seok Choi, Jungwan Park | 2018 | Numerical Analysis for Unsteady Flow in Turbine Operation of Pump-turbine | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 7-8 | ▷ |
| 179 | Jun-Won Suh, Seung-Jun Kim, Jin-Hyuk Kim, Won-Gu Joo, Jungwan Park, Young-Seok Choi | 2018 | Numerical analysis of Unstable characteristics in Turbine Brake Operation of Pump-turbine for Pumped Storage | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Venezia Hotel, Yeosu | 5-6 | ▷ |
| 178 | Seung-Jun Kim, Young-Seok Choi, Yong Cho, Jong-Woong Choi, Jin-Hyuk Kim | 2018 | Numerical Analysis of Inter-Blade Vortex Cavitation Characteristics in a Francis Hydro Turbine | The Korean Society for New and Renewable Energy (KSNRE) Fall Conference | | 204 | ▷ |
| 177 | Jin-Hyuk Kim, Arihant Sonawat, Seung-Jun Kim, Hyeon-Mo Yang, Young-Seok Choi, Kyoung-Yong Lee, Kyung-Min Kim, Yong-Kab Lee | 2018 | Performance Characteristic Analysis of a Positive Displacement Hydraulic Turbine Used for District Heating Pipeline with the Twisted Runner Shapes | The Korean Society for New and Renewable Energy (KSNRE) Fall Conference | | 147 | ▷ |
| 176 | Jin-Hyuk Kim, Jun-Won Suh, Young-Seok Choi, Won-Gu Joo, Hyo-Young Kim, Tae-Gon Kim, Seok-Woo Lee | 2018 | Performance Evaluation on Suction Module of Composite Head for Compound Processing Machine for CFRP Dust Removal | The Korean Society for Precision Engineering (KSPE) Fall Conference | Gunsan Saemangeum Convention Center, Gunsan | 18AOS146 | ▷ |
| 175 | Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi | 2018 | Development of Hydrodynamic design system for Mixed-flow Pump | National Congress of Fluids Engineering (NCFE, 10th) | Yeosu Expo Convention Center, Yeosu | Poster-025 | |
| 174 | Yong-In Kim, Sung Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Ryul Kim, Seon-Chang Kim, Young-Seok Choi | 2018 | Effect of Blade Thickness on Suction Performance of a Mixed-flow Pump Impeller | National Congress of Fluids Engineering (NCFE, 10th) | Yeosu Expo Convention Center, Yeosu | Poster-024 | ▷ |
| 173 | Jun-Won Suh, Jin-Hyuk Kim, Seung-Jun Kim, Hyeon-Mo Yang, Young-Seok Choi, Won-Gu Joo, Tae-Gyu Hwang, Kang-Hee Lee, Ujjwal Shrestha, Zhenmu Chen, Hyunkyoo Cho, Young-Do Choi, Jungwan Park | 2018 | A Study on the Establishment of Numerical analysis method of Pump-turbine for Pumped Storage | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Lotte City Hotel, Jeju | 179-180 | ▷ |
| 172 | Yong-In Kim, Sung Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi | 2018 | A Numerical Study on Suction Performance of a Mixed-flow Pump with Variation of Impeller Blade Thickness | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Lotte City Hotel, Jeju | 157-158 | ▷ |
| 171 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2018 | Development of Hydrodynamic Design System for Centrifugal and Mixed-Flow Pumps | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Lotte City Hotel, Jeju | 155-156 | ▷ |
| 170 | Jun-Won Suh, Jin-Hyuk Kim, Young-Seok Choi, Hyo-Young Kim, Tae-Gon Kim, Seok-Woo Lee, Won-Gu Joo | 2018 | A Suction Performance Evaluation and Re-design of Suction Module for CFRP Dust Removal | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Lotte City Hotel, Jeju | 71-72 | ▷ |
| 169 | Arihant Sonawat, Seung-Jun Kim, Young-Seok Choi, Kyoung-Yong Lee, Kyung-Min Kim, Yong-Kab Lee, Jin-Hyuk Kim | 2018 | Influence of geometrical parameters on the performance of a Positive Displacement Hydraulic Turbine Used for District Heating Pipeline | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Lotte City Hotel, Jeju | 40-41 | ▷ |
| 168 | Seung-Jun Kim, Young-Seok Choi, Yong Cho, Jong-Woong Choi, Jin-Hyuk Kim | 2018 | Blockage Effect of Runner Blade on Hydraulic Performance Characteristics of a Francis Hydro Turbine Model | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Lotte City Hotel, Jeju | 24-25 | ▷ |
| 167 | Seung-Jun Kim, Young-Seok Choi, Yong Cho, Jong-Woong Choi, Jin-Hyuk Kim | 2018 | A Geometrical Parametric Study on Hydraulic Performance Characteristics of a Small-Scaled Francis Hydro Turbine Model | The Korean Society for New and Renewable Energy (KSNRE) Spring Conference | Lotte Hotel, Seoul | 70 | ▷ |
| 166 | Jin-Hyuk Kim, Arihant Sonawat, Seung-Jun Kim, Young-Seok Choi, Kyoung-Yong Lee, Kyung-Min Kim, Yong-Kab Lee | 2018 | Preliminary design and performance analysis of 5kW positive displacement hydraulic turbine used for district heating pipeline | The Korean Energy Society Spring Conference | Maison Glad, Jeju | 79 | ▷ |
| 165 | Arihant Sonawat, Seung-Jun Kim, Young-Seok Choi, Kyoung-Yong Lee, Kyung-Min Kim, Yong-Kab Lee, Jin-Hyuk Kim | 2017 | Three-Dimensional Numerical Analysis for the Preliminary Design of a Positive Displacement Hydraulic Turbine Used for District Heating Pipeline | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Grand Hotel Convention Tower (Gangwonland Hotel), Jeongseon | 502-503 | ▷ |
| 164 | Wang-Gi Song, Young-Seok Choi, Kyoung-Yong Lee, Jin-Hyuk Kim | 2017 | Experimental Verification based on the Result of Numerical Analysis of the Optimized Single-Channel Pump for Wastewater Treatment | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Grand Hotel Convention Tower (Gangwonland Hotel), Jeongseon | 361-362 | ▷ |
| 163 | Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Ryul Kim, Young-Seok Choi | 2017 | Performance Analysis of Centrifugal Compressor for Heat Pump with Design Change | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Grand Hotel Convention Tower (Gangwonland Hotel), Jeongseon | 229-230 | ▷ |
| 162 | Arihant Sonawat, Kyoung-Yong Lee, Young-Seok Choi, Jin-Hyuk Kim | 2017 | Aerodynamic Performance Characteristics of a Refrigerant Compressor by Changing the Operating Condition | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Grand Hotel Convention Tower (Gangwonland Hotel), Jeongseon | 146-147 | ▷ |
| 161 | Seung-Jun Kim, Young-Seok Choi, Kyoung-Yong Lee, In-Soo Ahn, Yong Cho, Jin-Hyuk Kim | 2017 | Hydraulic Performance Analysis of a Francis Turbine according to Leakage Wall in Spiral Casing Tongue | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Grand Hotel Convention Tower (Gangwonland Hotel), Jeongseon | 96-97 | ▷ |
| 160 | Yong-In Kim, Sung Kim, Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi | 2017 | A Numerical Study of Impeller Leading Edge Thickness Effects on the Performance of a Mixed-flow Pump | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Grand Hotel Convention Tower (Gangwonland Hotel), Jeongseon | 43-44 | ▷ |
| 159 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2017 | Design of Suction Performance Improvement for Mixed-flow Pump Impeller Based on Optimum Design Database | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | Grand Hotel Convention Tower (Gangwonland Hotel), Jeongseon | 41-42 | ▷ |
| 158 | Seung-Jun Kim, Arihant Sonawat, Young-Seok Choi, Kyoung-Yong Lee, Kyung-Min Kim, Yong-Kab Lee, Jin-Hyuk Kim | 2017 | A Preliminary Study on the Design of a Positive Displacement Hydraulic Turbine Used for District Heating Pipeline | The Korean Society for New and Renewable Energy (KSNRE) Fall Conference | Riviera Hotel, Daejeon | 253 | ▷ |
| 157 | Wang-Gi Song, Young-Seok Choi, Kyoung-Yong Lee, Jin-Hyuk Kim | 2017 | A Study on the Radial Force at the Off-Design Points of a Single-Channel Pump for Wastewater Treatment | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 361-362 | ▷ |
| 156 | Sung Kim, Hyeon-Mo Yang, Yong Choi, Yong-In Kim, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi | 2017 | Design of Mixed-flow pump for Ns475 Based on Optimum Design Database | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 355-356 | ▷ |
| 155 | Yong Choi, Yong-Kab Lee, Kyoung-Yong Lee, Jin-Hyuk Kim, Sung Kim, Hyeon-Mo Yang, Yong-In Kim, Young-Seok Choi | 2017 | High Suction Performance Optimization of Mixed-flow Pump by using New Simulation Method | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 219-220 | ▷ |
| 154 | Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi | 2017 | Flow Analysis of Centrifugal Compressor for Heat Pump System | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 165-166 | ▷ |
| 153 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2017 | High Suction Performance Pump Design Based on Optimum Design Database | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 69-70 | ▷ |
| 152 | Jun-Won Suh, Jin-Hyuk Kim, Young-Seok Choi, Won-Gu Joo, Hyo-Young Kim, Tae-Gon Kim, Seok-Woo Lee | 2017 | A Performance Evaluation on Selection of Blower and Suction Module for CFRP Dust Removal | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 57-58 | ▷ |
| 151 | Jin-Woo Kim, Wang-Gi Song, Young-Ryul Kim, Seon-Chang Kim, Young-Seok Choi, Oh-Kyung Kwon, Dong-An Cha, Jin-Hyuk Kim | 2017 | A Study on the Thermal and Flow Characteristic of a Hybrid Decompression-Heat Pump Dryer with Drying Materials | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 52-53 | ▷ |
| 150 | Arihant Sonawat, Kyoung-Yong Lee, Young-Seok Choi, Jin-Hyuk Kim | 2017 | Aerodynamic Performance Improvement of a Refrigerant Compressor by Optimization | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | Shinan Beach Hotel, Mokpo | 34-35 | ▷ |
| 149 | In-Hyeok Song, Young-Seok Choi, Kyoung-Yong Lee, Jin-Hyuk Kim, Jae-Seung Lee, Hyun-Chul Kim, Chang-Koo Ahn, Joon-Yong Yoon | 2017 | Experimental Study on Parallel Operation of District Heating Pump | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | Yongpyong Resort, Pyeongchang | 17-S-102 | ▷ |
| 148 | Jin-Hyuk Kim, Jun-Won Suh, Young-Seok Choi, Won-Gu Joo, Hyo-Young Kim, Seok-Woo Lee | 2017 | A Study on Selection of Blower and Suction Module for CFRP Dust Removal | The Korean Society for Precision Engineering (KSPE) Spring Conference | | | ▷ |
| 147 | Jin-Woo Kim, Young-Seok Choi, Kyoung-Yong Lee, Toshiaki Kanemoto, Jin-Hyuk Kim | 2017 | A Study on the Internal Flow Characteristics between Counter-Rotating Runners at Turbine Mode of a Counter-Rotating Type Pump-Turbine | The Korean Society for New and Renewable Energy (KSNRE) Spring Conference | | | ▷ |
| 146 | Yong-Kab Lee, Hyeon-Mo Yang, Sung Kim, Kyoung-Yong Lee, Yong Choi, Jin-Hyuk Kim, Young-Seok Choi | 2016 | Suction Performance Improvement of Mixed-flow Pump by using New Simulation Method | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 145 | Wang-Gi Song, Bo-Min Cho, Jin-Hyuk Kim, Young-Seok Choi, Kyoung-Yong Lee | 2016 | A Study on Performance Characteristics of a Single-channel Pump with the Impeller-Volute Interaction | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 144 | Seung-Deok Yang, Kyoung-Yong Lee, Hyeon-Mo Yang, Joon-Yong Yoon, Jin-Woo Kim, Jin-Hyuk Kim, Young-Seok Choi | 2016 | Preliminary Design and Numerical Analysis of Organic Rankine Cycle Turbine | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 143 | Jun-Won Suh, Yong-Kab Lee, Won-Gu Joo, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi | 2016 | Multiphase Flow Analysis Scheme for Air-water Bubbly Flow in a Multiphase Pump | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 142 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2016 | Development of Design Program for High Suction Performance Pump | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 141 | Jun-Won Suh, Yong-In Kim, Jin-Hyuk Kim, Young-Seok Choi, Won-Gu Joo, Sang-Ho Yang | 2016 | A Study on Performance Evaluation and Analysis of High-pressure Axial-flow Fan for Long Subsea Tunnel | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 140 | Jin-Woo Kim, Jin-Hyuk Kim, Young-Seok Choi, Oh-Kyung Kwon, Seon-Chang Kim, Dong-An Cha, Young-Ryul Kim | 2016 | A Numerical Study on Three-Dimensional Flow in a Hybrid Decompression-Heat Pump Dryer for Fishery Products | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 139 | Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Ung-Been Jeong, Joon-Yong Yoon | 2016 | Design Optimization of the Impeller for Mixed-flow Pump of Ns 1200 with different Hub Ratio | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 138 | Jin-Woo Kim, Jin-Hyuk Kim, Young-Seok Choi | 2016 | Optimization Technique for Improving Simultaneous Performance of Pump and Turbine Modes of a Counter-Rotating type Pump-Turbine Unit | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 137 | In-Hyeok Song, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Jae-Seung Lee, Hyun-Chul Kim, Shin-Young Im | 2016 | A Study on Optimal Operation of District Heating Pump | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 136 | Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Seung-Yong Kwak, Heon-Woo Ha, Yong-Hoon Cho | 2016 | Performance Analysis of Compressor using Low GWP Refrigerant | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 135 | Arihant Sonawat, Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi, Jin-Hyuk Kim | 2016 | Performance Analysis of a Centrifugal Compressor for Turbo Chiller System | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | | ▷ |
| 134 | Ung-Been Jeong, Sung Kim, Jin-Hyuk Kim, Kyoung-Yong Lee, Young-Seok Choi, Joon-Yong Yoon | 2016 | 사류펌프의 임펠러 출구각 및 디퓨저 입구각에 대한 다중목적 최적화 | National Congress of Fluids Engineering (NCFE, 9th) | | 126 | |
| 133 | Bo-Min Cho, Jin-Hyuk Kim, Young-Seok Choi, Kyoung-Yong Lee | 2016 | A Study on Fluid-induced-vibration Reduction via Optimization of Unsteady Radial Force of a Single-channel Pump | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 237-238 | ▷ |
| 132 | In-Hyung Park, Yong-Kab Lee, Young-Seok Choi | 2016 | 원심 및 사류펌프 해석자동화 프로그램 EXPRO를 이용한 Cavitation 해석 | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 173 | ▷ |
| 131 | Hyeon-Seok Shim, Kwang-Yong Kim, Won-Chul Choi, Il-Soo Yoo, Young-Seok Choi | 2016 | Effects of Meridional Profile on Hydraulic Performance and Flow Structure of a Centrifugal Pump | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 171-172 | ▷ |
| 130 | Yong Choi, Yong-Kab Lee, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim, Hyeon-Mo Yang, Young-Seok Choi | 2016 | A Study on the Improvement about Performance Method of Net Positive Suction Head Required for Mixed-flow Pump | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 169-170 | ▷ |
| 129 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2016 | High Efficiency Pump Design Based on Optimum Design Database | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 167-168 | ▷ |
| 128 | Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Seung-Yong Kwak, Heon-Woo Ha, Yong-Hoon Cho | 2016 | Prediction of Performance Variation of Compressor by Changing Refrigerants | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 146-147 | ▷ |
| 127 | Sang-Ho Yang, Kyung-Yup Kim, Young-Seok Choi, Jin-Hyuk Kim | 2016 | A Development on High-Pressure Axial-Flow Fan used for the Ventilation in Long Subsea Tunnel | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 99-100 | ▷ |
| 126 | Uk-Hee Jung, Sung Kim, Jin-Hyuk Kim, Kyoung-Yong Lee, Young-Seok Choi | 2016 | Numerical study on performance improvement when the strong vortex occurs on the shroud of vaneless diffuser in turbo blower | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 91-92 | ▷ |
| 125 | Kyoung-Yong Lee, In-Hyeok Song, Jin-Hyuk Kim, Young-Seok Choi, Jae-Seung Lee, Hyun-Chul Kim, Shin-Young Im | 2016 | Analysis of Parallel Operation Characteristics of District Heating Pump | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 10 | ▷ |
| 124 | Jin-Woo Kim, Jun-Won Suh, Joon-Hyung Kim, Young-Seok Choi, Kyoung-Yong Lee, Jin-Hyuk Kim | 2016 | Effect on the Efficiency of a Counter-Rotating Pump-Turbine with the Variation of Blade Angle Using Design of Experiment (2k Factorial Design) | The Korean Society for New and Renewable Energy (KSNRE) Spring Conference | | 285 | ▷ |
| 123 | Jin-Woo Kim, Jun-Won Suh, Jin-Hyuk Kim, Young-Seok Choi, Kyoung-Yong Lee, Won-Gu Joo, Toshiaki Kanemoto | 2015 | A Study on Performance Improvement of a Counter-Rotating Pump-Turbine Using Multi-objective Optimization | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 289-290 | ▷ |
| 122 | Bo-Min Cho, Jin-Hyuk Kim, Young-Seok Choi, Kyoung-Yong Lee | 2015 | Multi-objective Optimization of a Single-Channel Pump Volute for Wastewater Treatment Based on Unsteady CFD Analysis | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 285-286 | ▷ |
| 121 | Jun-Won Suh, Joon-Hyung Kim, Jin-Hyuk Kim, Young-Seok Choi, Won-Gu Joo, Kyoung-Yong Lee | 2015 | A Study on Design Optimization of the Multi-stage Helico-axial Pump for Offshore Plant | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 283-284 | ▷ |
| 120 | Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Kyung-Ho Jeong, Jae-Hyun Ma | 2015 | Performance Prediction of Turbo Blower by Variation of Impeller Exit Diameter | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 158-159 | ▷ |
| 119 | Yong-Kab Lee, In-Hyung Park, Jae-Hyok Shin, Young-Seok Choi | 2015 | 원심 및 사류펌프에 대한 ANSYS CFX validation 과정 및 해석 자동화 | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 103 | ▷ |
| 118 | Man-Woong Heo, Hyeon-Seok Shim, Kwang-Yong Kim, Won-Chul Choi, Il-Soo Yoo, Young-Seok Choi | 2015 | High-Efficiency Design Optimization of a Centrifugal Pump of NS 220 | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 99-100 | ▷ |
| 117 | Ung-Been Jeong, Sung Kim, Kyoung-Yong Lee Jin-Hyuk Kim, Young-Seok Choi, Joon-Yong Yoon | 2015 | Design Optimization of Inlet Meridional Shape for Mixed-flow Pump Impeller Using RSM | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 97-98 | ▷ |
| 116 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2015 | Hydrodynamic Design for Mixed-flow Pumps Based on Optimum Design Database | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 95-96 | ▷ |
| 115 | Hyeon-Mo Yang, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Seung-Yong Kwak, Heon-Woo Ha, Yong-Hoon Cho | 2015 | Numerical Analysis and Performance Comparison of drop-in system for 2stages Refrigerant Centrifugal Compressor | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 88-89 | ▷ |
| 114 | Uk-Hee Jung, Sung Kim, Jin-Hyuk Kim, Young-Seok Choi | 2015 | Analyzing the shape parameter effects on the performance of the mixed-flow fan using CFD & DOE | The Korean Society for Fluid Mechanics (KSFM) Winter Conference | | 62-63 | ▷ |
| 113 | Bo-Min Cho, Joon-Hyung Kim, Jin-Hyuk Kim, Young-Seok Choi, Kyoung-Yong Lee, Youn-Sung Kim, Kwang-Yong Kim, Hye-Young Oh, Tae-Sang Ahn | 2015 | Sensitivity Analysis for Geometric Variables Effect on the Performance of a Single-Channel Pump Impeller | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 170-171 | ▷ |
| 112 | Jun-Won Suh, Joon-Hyung Kim, Jin-Hyuk Kim, Young-Seok Choi, Won-Gu Joo, Il-Soo Yoo, Won-Chul Choi, Jin-Ho Son | 2015 | A Study on Performance Verification and Design Optimization of a Multiphase Pump for Offshore Plant | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 168-169 | ▷ |
| 111 | Kyoung-Yong Lee, Uk-Hee Jung, Jin-Hyuk Kim, Cheol-Ho Kim, Young-Seok Choi, Jae-Hyun Ma, Kyung-Ho Jeong, Woon-Jean Park | 2015 | Analysis of Noise Characteristic of Uneven Pitch Regenerative Blower | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 96 | ▷ |
| 110 | Jae-Hyun Ma, Kyung-Ho Jeong, Byoung-Sam Kim, Young-Seok Choi, Kyoung-Yong Lee, Jin-Hyuk Kim, Uk-Hee Jung, Cherl-Young Jeong | 2015 | Development and Performance Verification of a Variable Turbo Blower for Building HVAC | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 94-95 | ▷ |
| 109 | Won-Chul Choi, Young-Chul Im, Il-Soo Yoo, Young-Seok Choi | 2015 | Numerical Investigation of the Effect of Surface Roughness on the Performance of Centrifugal Pumps | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 83-84 | ▷ |
| 108 | Man-Woong Heo, Hyeon-Seok Shim, Kwang-Yong Kim, Won-Chul Choi, Il-Soo Yoo, Young-Seok Choi | 2015 | A Study on the Effects of Geometric Variables on the Hydrodynamic Performance of A Centrifugal Pump | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 81-82 | ▷ |
| 107 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim | 2015 | Design of mixed-flow pump impellers using tendency for design variables | The Korean Society for Fluid Mechanics (KSFM) Summer Conference | | 79-80 | ▷ |
| 106 | Jin-Hyuk Kim, Kyoung-Yong Lee, Uk-Hee Jung, Young-Seok Choi, Cheol-Ho Kim, An-Mok Jeong, Jae-Hyun Ma, Kyung-Ho Jeong | 2015 | Aeroacoustic Optimization of a Regenerative Blower for Fuel Cell with Uneven Pitch | The Korean Society for New and Renewable Energy (KSNRE) Spring Conference | | 181 | ▷ |
| 105 | Jin-Hyuk Kim, Sung Kim, Kyoung-Yong Lee, Young-Seok Choi, Hwan-Gorl Yeo, Cherl-Young Jeong | 2014 | High – Efficiency Design of an Axial-Flow Fan Blade for Refrigeration and Air-Conditioning | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 104 | Jin-Hyuk Kim, Joon-Hyung Kim, Bo-Min Cho, Kyoung-Yong Lee, Young-Seok Choi, Youn-Sung Kim, Jae-Chun Cho, Kwang-Yong Kim | 2014 | Optimization of a Single – Vane Submersible Pump Impeller for Waste Treatment | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 103 | Young-Seok Choi, Kyoung-Yong Lee, Sung Kim, Jin-Hyuk Kim | 2014 | Development of Design Program for Centrifugal and Mixed-flow Pump(Ns 150 – 1200) | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 102 | In-Hyung Park, Yong-Kab Lee, Choon-Man Jang, Young-Seok Choi | 2014 | Introduction of Turbomachinery Optimization Using HEEDS and CFX | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 101 | Man-Woong Heo, Sang-Bum Ma, Kwang-Yong Kim, Won-Chul Choi, Il-Soo Yoo, Young-Seok Choi | 2014 | High Efficiency Design of a Centrifugal Pump with NS360 Using a Surrogate Model | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 100 | Jun-Won Suh, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Won-Gu Joo | 2014 | A Numerical Study on the Performance Characteristics of Variation of Blade Distribution of Mid – span for Impeller of Mixed-flow Pump | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 99 | Hyeon-Mo Yang, Sung Kim, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi | 2014 | Optimum Design and Performance Test of Mixed – flow Pump for Ns 550 | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 98 | Jun-Won Suh, Kyoung-Yong Lee, Jin-Hyuk Kim, Young-Seok Choi, Young-Hee Kim, Won-Gu Joo | 2014 | The Flow Characteristics Analysis of Placement of Circular Cylinder type Non-thermal Plasma Generator | The Korean Society of Mechanical Engineers (KSME) Fall Conference | Gwangju | | ▷ |
| 97 | Sung Kim, Kyoung-Yong Lee, Young-Seok Choi | 2014 | 디퓨저 날개각 분포가 사류펌프 성능에 미치는 영향 | National Congress of Fluids Engineering (NCFE) | Buyeo | | |
| 96 | Jin-Hyuk Kim, Risa Kasahara, Toru Miyaji, Toshiaki Kanemoto, Young-Seok Choi | 2014 | 엇회전식 펌프-터빈 유닛의 적용에 따른 파워 안정화 시스템 구축 | National Congress of Fluids Engineering (NCFE) | Buyeo | | |
| 95 | Joon-Hyung Kim, Him-Chan Lee, Jin-Hyuk Kim, Jun-Ho Kim, Il-Soo Yoo, Won-Chul Choi, Joon-Yong Yoon, Young-Seok Choi | 2014 | 최적 설계 기법을 적용한 해양플랜트용 다상유동 펌프 개발 | National Congress of Fluids Engineering (NCFE) | Buyeo | | |
| 94 | Him-Chan Lee, Joon-Hyung Kim, Jin-Hyuk Kim, Jun-Ho Kim, Il-Soo Yoo, Won-Chul Choi, Joon-Yong Yoon, Young-Seok Choi | 2014 | 수력성능 향상을 위한 Helico-Axial 펌프의 최적설계 | National Congress of Fluids Engineering (NCFE) | Buyeo | | |
| 93 | Jin-Hyuk Kim, Young-Seok Choi, Kyoung-Yong Lee, Uk-Hee Jung | 2014 | A Numerical study on the design parameters of vaneless diffuser for a Variable-Speed Turbo blower | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | | ▷ |
| 92 | Man-Woong Heo, Kwang-Yong Kim, Jun-Hee Kim, Jin-Hyuk Kim, Kyoung-Yong Lee, Sung Kim, Young-Seok Choi | 2014 | Design Optimization of a Mixed-Flow Pump Using a Surrogate Model | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | | ▷ |
| 91 | Him-Chan Lee, Joon-Hyung Kim, Jin-Hyuk Kim, Kyoung-Yong Lee, Young-Seok Choi, Joon-Yong Yoon, Chang-Jo Kim | 2014 | Numerical Study for Reliability Verification of Performance of Vacuum Pump | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | | ▷ |
| 90 | Joon-Hyung Kim, Him-Chan Lee, Jin-Hyuk Kim, Kyoung-Yong Lee, Joon-Yong Yoon, Young-Seok Choi | 2014 | Optimal Design Techniques for the Development of the Centrifugal Pump | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | | ▷ |
| 89 | Sung Kim, Kyoung-Yong Lee, Young-Seok Choi | 2014 | Design optimization for the performance improvement of impeller in mixed-flow pump | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | | ▷ |
| 88 | Kyoung-Yong Lee, Uk-Hee Jung, Young-Seok Choi | 2013 | Development of Platform Technology of Design and DAQ for Nozzle Type Flow Meter | The Korean Society of Mechanical Engineers (KSME) Conference | | | ▷ |
| 87 | Uk-Hee Jung, Kyoung-Yong Lee, Sang-Ho Yang, Kyung-Yup Kim | 2013 | Nozzle design of air curtain in the tunnel using CFD | The Korean Society of Mechanical Engineers (KSME) Conference | | | ▷ |
| 86 | Joon-Hyung Kim, Joon-Yong Yoon, Young-Seok Choi | 2013 | Numerical Study of Multiphase Flow in a Venturi | The Korean Society of Mechanical Engineers (KSME) Conference | | | ▷ |
| 85 | Hyeon-Mo Yang, Kyoung-Yong Lee, Young-Seok Choi, Kyung-Ho Jeong | 2013 | Visualization of Flow inside a Regenerative Blower in accordance with changing working condition | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 84 | Jin-Hee Kim, Uk-Hee Jung, Young-Seok Choi, Shin-Woo Kang, Sung-Ju Im, Joon-Yong Yoon | 2013 | Study on the Uniformity Improvements for a Fan Filter Unit using CFD | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 83 | Him-Chan Lee, Joon-Hyung Kim, Joon-Yong Yoon, Chang-Jo Kim, Young-Seok Choi | 2013 | A Numerical Study on the Performance Evaluation of the Vacuum Pump for Waste Treatment | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 82 | Hyeon-Mo Yang, Kyoung-Yong Lee, Kyung-Seok Jeong | 2013 | Visualization of Flow inside a Regenerative Turbomachinery | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | | ▷ |
| 81 | Joon-Hyung Kim, Young-Seok Choi, Joon-Yong Yoon | 2013 | Development of Multiphase Pump for Offshore Plant | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | C21 | ▷ |
| 80 | Hyun-Chang Park, Sung Kim, Kyoung-Yong Lee, Joon-Yong Yoon, Young-Seok Choi | 2012 | 사류펌프 임펠러 출구 자오면 형상 변화에 대한 수치해석적 연구 | The Korean Society for Fluid Mechanics (KSFM) Conference | | KFMA_2012_OA07059 | |
| 79 | Hyun-Chang Park, Sung Kim, Joon-Yong Yoon, Young-Seok Choi | 2012 | 사류펌프 임펠러 간극의 영향에 관한 수치해석적 연구 | National Congress of Fluids Engineering (NCFE) | | 339-340 | |
| 78 | Hyun-Chang Park, Sung Kim, Kyoung-Yong Lee, Jun-Ho Kim, Joon-Yong Yoon, Young-Seok Choi | 2011 | Effect of Design Variables on the Performance of Axial-flow Pump Guide Vanes | The Korean Society for Fluid Mechanics (KSFM) Conference | | 596-597 | ▷ |
| 77 | Kyoung-Yong Lee, Young-Seok Choi, Kyung-Ho Jeong, Woon-Jean Park | 2011 | Analysis of Performance Characteristics by Inner Flow Path of Side Channel Type Ring Blower | The Korean Society for Fluid Mechanics (KSFM) Conference | | 546-550 | ▷ |
| 76 | Kwon-Bum Pyun, Joon-Hyung Kim, Young-Seok Choi, Joon-Yong Yoon | 2011 | Design Optimization of a Centrifugal Pump Impeller using RSM and Design of Volute | The Korean Society for Fluid Mechanics (KSFM) Conference | | 519-525 | ▷ |
| 75 | Joon-Hyung Kim, Jin-Hyuk Kim, Kwang-Yong Kim, Joon-Yong Yoon, Young-Seok Choi, Sang-Ho Yang | 2011 | Optimization Design of a Tunnel Ventilation Jet Fan Using Response Surface Approximation | The Korean Society for Fluid Mechanics (KSFM) Conference | | 479-480 | ▷ |
| 74 | Uk-Hee Jung, Young-Seok Choi, Jong-Hyeon Peck, Kyoung-Yong Lee, Dong-Yeol Jung | 2011 | Investigation of solidification and melting of PCM in a vertical cylinder using CFD | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 1231-1234 | ▷ |
| 73 | Sung Kim, Young-Seok Choi, Kyoung-Yong Lee, Jun-Ho Kim | 2011 | Hydrodynamic Design of Axial-flow Pump Impellers | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 1123-1126 | ▷ |
| 72 | Hyung-Kuk Kim, Chun-Wan Park, Dong-Gyu Lee, Jong-Hyeon Peck, Young-Seok Choi, Chae-Dong Kang | 2011 | Experimental Study on Melting/Solidification of Adjoining Two Different PCMs with alternate arrangement | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 393-397 | ▷ |
| 71 | Young-Seok Choi, Kwang-Yong Kim | 2011 | Development of High-Efficiency and Low-Noise Fans | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | 160-160 | ▷ |
| 70 | Sang-Ho Yang, Young-Seok Choi, Joon-Hyung Kim, Kyung-Yup Kim | 2011 | Development of High Speed & Compact Jet Fan | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | 23-24 | ▷ |
| 69 | Young-Seok Choi, Kyoung-Yong Lee, Kyung-Ho Jeong, Young-Kyoun Kim, Jung-Moo Seo | 2011 | Design and Performance Evaluation of Side Channel Type Regenerative Blower | The Korean Society of Mechanical Engineers (KSME) Spring Conference | | 31-32 | ▷ |
| 68 | In-Gyu Oh, Young-Seok Choi, Joon-Hyung Kim, Sang-Ho Yang, Oh-Myoung Kwon | 2010 | A Study on the Reversible Performance of the Jet-fan with an Asymmetric Rotor | The Korean Society for Fluid Mechanics (KSFM) Conference | | KFMA2010-081 | ▷ |
| 67 | Joon-Hyung Kim, Young-Seok Choi, Joon-Yong Yoon, Sung-Kwan Park, Seok-Ho Hyun | 2010 | Performance Improvement of Fan and Duct system for Kimchi Refrigerator | The Korean Society for Fluid Mechanics (KSFM) Conference | | KFMA2010-062 | ▷ |
| 66 | Young-Seok Choi, Sung Kim, Kyoung-Yong Lee, Jun-Ho Kim | 2010 | Design Optimization of Mixed-flow Pump Impellers and Diffusers | The Korean Society for Fluid Mechanics (KSFM) Conference | | KFMA2010-046 | ▷ |
| 65 | Kyoung-Yong Lee, Young-Seok Choi | 2010 | Design and Performance Evaluation of Side Channel Type Ring Blower | The Korean Society for Fluid Mechanics (KSFM) Conference | | KFMA2010-116 | ▷ |
| 64 | Chi-Yong Park, Young-Seok Choi, Kyoung-Yong Lee, Joon-Yong Yoon | 2010 | Numerical Analysis of Guide Vane effect in Ring Groove for a Centrifugal Compressor | The Korean Society for Fluid Mechanics (KSFM) Conference | | KFMA2010-032 | ▷ |
| 63 | Sung Kim, Young-Seok Choi, Kyoung-Yong Lee | 2010 | 자오면 형상 변수를 적용한 사류펌프 임펠러 최적설계 | National Congress of Fluids Engineering (NCFE) | | 115-118 | |
| 62 | Kyoung-Yong Lee, Young-Seok Choi, Kyung-Ho Jeong | 2010 | 사이드 채널혈 링블로워의 설계 | National Congress of Fluids Engineering (NCFE) | | 111-114 | |
| 61 | Uk-Hee Jung, Young-Seok Choi, Seon-Chang Kim, Kyoung-Yong Lee, Sung Kim, A. S. Cho | 2010 | 헤어드라이기용 사류팬 설계 | National Congress of Fluids Engineering (NCFE) | | 50-53 | |
| 60 | In-Gyu Oh, Young-Seok Choi, Joon-Hyung Kim, Sang-Ho Yang, Oh-Myoung Kwon | 2010 | Design of Jet Fan considering Reversible Performance | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 10-S-253 | ▷ |
| 59 | Chi-Yong Park, Young-Seok Choi, Kyoung-Yong Lee, Joon-Yong Yoon | 2010 | Numerical Investigation of Ring Groove Effect in a Centrifugal Compressor | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 10-S-240 | ▷ |
| 58 | Sung Kim, Young-Seok Choi, Kyoung-Yong Lee, Joon-Hyung Kim, Hyung-Ho Park | 2009 | Design of In-line Type Centrifugal Pump with Low Specific Speed | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 57 | Kyoung-Yong Lee, Young-Seok Choi, Sung Kim, Chan-Hui Lee | 2009 | Design of in-line ballast pump with inverse design method | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 56 | Joon-Hyung Kim, Young-Seok Choi, Pil-Je Park | 2009 | Performance Improvement of Centrifugal Pump with Double Volute | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 55 | In-Gyu Oh, Young-Seok Choi, Joon-Hyung Kim, Sang-Ho Yang, Oh-Myoung Kwon | 2009 | Effects of Design Parameters on the Performance of Jet-fan | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 54 | Sung Kim, Kyoung-Yong Lee, Jun-Ho Kim, Young-Seok Choi | 2009 | A Numerical Study on the Improvement of Suction Performance of Mixed-flow Pump with Ns 380 | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 53 | Chan-Hui Lee, Pil-Je Park, Young-Seok Choi | 2009 | Cargo Tank Cleaning Pump Design for Chemical Tanker | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 52 | Young-Seok Choi, Kyoung-Yong Lee, Kyung-Ho Jeong | 2009 | Design and performance evaluation of small high speed regenerative blower | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 51 | Kyoung-Yong Lee, Young-Seok Choi, Jun-Ho Kim | 2009 | Design of Impeller and Diffuser for Mixed Flow Pump with Inverse Design Method | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 09-S-233 | ▷ |
| 50 | Sung Kim, Young-Seok Choi, Kyoung-Yong Lee | 2009 | Blade Shape Design of Mixed-flow Pump Impellers and Diffusers in a Fixed Meridional Geometry | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 09-S-212 | ▷ |
| 49 | Kyoung-Yong Lee, Young-Seok Choi, Jae-Goo Jeong, Jeong-Hwan Kim | 2008 | Design of Volute for Constant Air Volume Sirocco Fan | The Korean Society for Fluid Mechanics (KSFM) Conference | | 507-512 | ▷ |
| 48 | Young-Seok Choi, Kyoung-Yong Lee, Joon-Hyung Kim, Sung Kim | 2008 | Design Optimization of Mixed-flow Pump Impellers and Diffusers | The Korean Society for Fluid Mechanics (KSFM) Conference | | 57-62 | ▷ |
| 47 | Sung Kim, Young-Seok Choi, Joon-Yong Yoon | 2008 | Design of Side-suction Inlet Geometry for Centrifugal Pump | The Korean Society for Fluid Mechanics (KSFM) Conference | | 577-578 | ▷ |
| 46 | Sung Kim, Young-Seok Choi, Joon-Hyung Kim, Joon-Yong Yoon | 2008 | 임펠러 형상변수가 원심펌프 성능에 미치는 영향 | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 08-S-215 | |
| 45 | Kyoung-Yong Lee, Young-Seok Choi, Dong-Soon Jeon, Seon-Chang Kim, Kwang-Eun Son | 2008 | LED 프로젝터 방열용 히트싱크의 성능평가 | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 08-S-192 | |
| 44 | Sung Kim, Young-Seok Choi, Joon-Yong Yoon | 2007 | Design Optimization of a Centrifugal Pump Impeller Using RSM | The Korean Society for Fluid Mechanics (KSFM) Conference | | 281-286 | ▷ |
| 43 | Uk-Hee Jung, Young-Seok Choi, Oh-Myoung Kwon, Kyoung-Yong Lee | 2007 | Numerical Analysis of the Performance Influence of Uneven Blade Spacing in Multiblade Turbomachinery | The Korean Society for Fluid Mechanics (KSFM) Conference | | 109-114 | ▷ |
| 42 | Joon-Hyung Kim, Young-Seok Choi, Kyoung-Yong Lee | 2007 | Effects of inlet shape on the suction performance of a submerged cargo pump | The Korean Society for Fluid Mechanics (KSFM) Conference | | 174-179 | ▷ |
| 41 | Kyoung-Yong Lee, Young-Seok Choi, Jin-Wook Jang | 2007 | Performance Improvement Based on Analysis of Internal Flow in Regenerative Type Fuel Pump | The Korean Society for Fluid Mechanics (KSFM) Conference | | 287-292 | ▷ |
| 40 | Young-Seok Choi, Joon-Hyung Kim, Kyoung-Yong Lee, Ki-Won Jang, Pil-Sun Jun, Joon-Tae Kim, Sung-Chan Kim | 2007 | A Performance Prediction of Fuel Pump Using CFD | The Korean Society for Fluid Mechanics (KSFM) Conference | | 413-418 | ▷ |
| 39 | Sung Kim, Young-Seok Choi, Kyoung-Yong Lee, Joon-Yong Yoon | 2007 | 자오면 고정형상에서 날개각 분포가 원심펌프 성능에 미치는 영향 | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 21-26 | |
| 38 | Joon-Hyung Kim, Young-Seok Choi, Kyoung-Yong Lee | 2007 | Effects of inlet shape on the performance of a submerged cargo pump | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 15-20 | ▷ |
| 37 | Young-Seok Choi, Uk-Hee Jung, Kyoung-Yong Lee | 2006 | Performance Improvement of Sirocco Fan using Design of Experiments | National Congress of Fluids Engineering (NCFE, 4th) | | 283-286 | ▷ |
| 36 | Young-Seok Choi, Sung Kim, Seon-Chang Kim | 2006 | Design Optimization of the Air Nozzle System in the Automatic Car Wash Machine Using Response Surface Method | National Congress of Fluids Engineering (NCFE, 4th) | | 357-360 | ▷ |
| 35 | Kyoung-Yong Lee, Young-Seok Choi, Kwang-Eun Son | 2006 | Numerical Study of Channel Area Effects on the Performance Characteristics of Regenerative Type Fuel Pump | National Congress of Fluids Engineering (NCFE, 4th) | | 1149-1152 | ▷ |
| 34 | Kyoung-Yong Lee, Young-Seok Choi, Young-Ryul Kim, Jae-Ho Yun | 2006 | Design of Axial Fan using Inverse Design Method | The Korean Society for Fluid Mechanics (KSFM) Conference | | 313-316 | ▷ |
| 33 | Young-Seok Choi, Uk-Hee Jung, Kyoung-Yong Lee, Oh-Myoung Kwon | 2006 | Optimum Design of Air Nozzle System for Automatic Car Wash Machine using CFD and DOE | The Korean Society for Fluid Mechanics (KSFM) Conference | | 317-322 | ▷ |
| 32 | Kyoung-Yong Lee, Young-Seok Choi | 2005 | Design and Performance Evaluation of Side Channel Type Regenerative Blower | The Korean Society for Fluid Mechanics (KSFM) Conference | | 378-383 | ▷ |
| 31 | Deok-Su Kim, Young-Seok Choi, Sang-Gyu Jeon, Joon-Yong Yoon | 2005 | A Numerical Study on the Effect of Volute Geometry on the Performance of Centrifugal Pump | The Korean Society for Fluid Mechanics (KSFM) Conference | | 497-502 | ▷ |
| 30 | Young-Seok Choi, Deok-Su Kim, Kyoung-Yong Lee, Joon-Yong Yoon | 2005 | Effect of Volute Area Distributions on the Performance Characteristic Curve of a Centrifugal Pump | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Winter Conference | | 558-563 | ▷ |
| 29 | Kyoung-Yong Lee, Young-Seok Choi, Jae-Ho Yun | 2005 | Performance Change of the Heat sink with the Connection Type of a Fan | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 232-237 | ▷ |
| 28 | Cheol-Ho Kim, Young-Seok Choi | 2005 | Noise Characteristics of Improved Sirocco Fan for Range Hood | The Korean Society for Noise and Vibration Engineering (KSNVE) Spring Conference | | 209-212 | ▷ |
| 27 | Sang-Tae Park, Young-Seok Choi, Moon-Soo Park, Cheol-Ho Kim, Oh-Myoung Kwon | 2004 | Numerical study on the Performance Improvement of the Sirocco Fan in a Range Hood | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 26 | Kyoung-Yong Lee, Young-Seok Choi, Jae-Ho Yun | 2004 | A Study on the Flow and Cooling Characteristics with the Inlet Blockage of a Fan – Sink | The Korean Society for Fluid Mechanics (KSFM) Conference | | | ▷ |
| 25 | Su-Dong Lee, Moon-Soo Park, Jin-Eun Chung, Young-Seok Choi | 2004 | Study on the Energy Efficiency Improvement Compared Refrigeration Dehumidification System with Liquid Desiccant Dehumidification System | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Conference | | | ▷ |
| 24 | Kyoung-Yong Lee, Young-Seok Choi, Jae-Ho Yun | 2004 | Experimental and Numerical Studies on the Flow Characteristics of a Fan-Sink | National Congress of Fluids Engineering (NCFE) | | | ▷ |
| 23 | Sang-Tae Park, Young-Seok Choi, Moon-Soo Park, Cheol-Ho Kim, Oh-Myoung Kwon | 2004 | A Study on the Performance Characteristics of the Sirocco Fan in a Range Hood | National Congress of Fluids Engineering (NCFE) | | | ▷ |
| 22 | Young-Seok Choi, Deok-Su Kim, Joon-Yong Yoon | 2004 | Effects of Flow Settling Means on the Performance of Fan Tester | National Congress of Fluids Engineering (NCFE) | | | ▷ |
| 21 | Cheol-Ho Kim, Young-Seok Choi | 2004 | Noise Reduction of Range Hood in Kitchen Ventilation System | The Korean Society for Noise and Vibration Engineering (KSNVE) Spring Conference | | 848-851 | ▷ |
| 20 | Kyoung-Yong Lee, Young-Seok Choi, Woon-Jean Park | 2003 | Numerical Study on Tip Clearance Effect on Performance Characteristics of a Centrifugal Compressor for a R134a Turbo – Chiller | The Korean Society for Fluid Mechanics (KSFM) Conference | | 451-456 | ▷ |
| 19 | Young-Seok Choi, Jin-Kwon Kim | 2003 | Fan Performance Test with Automatic Control and Measurement | The Korean Society for Fluid Mechanics (KSFM) Conference | | 373-378 | ▷ |
| 18 | Su-Dong Lee, Moon-Soo Park, Jin-Eun Chung, Young-Seok Choi | 2003 | Study on the Performance Characteristics with the Height of a Regenerator and Dehumidifier for Liquid Desiccant Dehumidification System | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Winter Conference | | 158-163 | ▷ |
| 17 | Kyoung-Yong Lee, Young-Seok Choi, Hyeon-Koo Lee, Kil-Young Kim | 2003 | Numerical Study on the Performance Characteristics of a Centrifugal Compressor for a R134a Turbo – Chiller | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 126 | ▷ |
| 16 | Jong-Il Ju, Young-Seok Choi, Yong-Kab Lee, Tak-Hyun Kim, Sang-Yong Kim | 2002 | Numerical Study of Turbulent Flow in a Hydrocyclone | The Korean Society for Fluid Mechanics (KSFM) Conference | | 389-395 | ▷ |
| 15 | Young-Seok Choi, Kyoung-Yong Lee, Chang-Han Lee, Jong-Hun Lee | 2002 | Development of Leakage – free Automatic Discharge Connector in a Submersible Pump | The Korean Society for Fluid Mechanics (KSFM) Conference | | 63-68 | ▷ |
| 14 | Young-Seok Choi, Kyoung-Yong Lee, Shin-Hyoung Kang | 2002 | Performance Prediction of Side Channel Type Fuel Pump | National Congress of Fluids Engineering (NCFE) | | 581-584 | ▷ |
| 13 | Young-Seok Choi, Jong-Il Ju, Won-Gu Joo | 2001 | Inlet Shape Design of Air Handling Unit Using Commercial CFD Code | The Korean Society for Fluid Mechanics (KSFM) Conference | | 448-453 | ▷ |
| 12 | Young-Seok Choi, Yong-Kab Lee, Jong-Il Ju | 2001 | 유동해석을 사용한 공조기 입구형상의 최적설계 | The Korean Institute of Venture Technology Spring Conference | | 108-112 | |
| 11 | Young-Seok Choi, Yong-Kab Lee | 2001 | Optimal inlet shape design of air handling unit | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Conference | | 51-63 | ▷ |
| 10 | Young-Seok Choi, Yong-Kab Lee, S. S. Hong, Shin-Hyoung Kang | 2000 | Performance Analysis of the Centrifugal Pump Impeller Using Commercial CFD Code | The Korean Society for Fluid Mechanics (KSFM) Conference | | 305-311 | ▷ |
| 9 | Young-Seok Choi, Jae-Hwan Lee, Sang-Il Kim | 1999 | A Numerical Study on the Effect of Blade Shapes on the Performance of the Propeller – type Submersible Mixers | The Korean Society for Fluid Mechanics (KSFM) Conference | | 252-256 | ▷ |
| 8 | Young-Seok Choi, Jae-Hwan Lee | 1999 | Fluent를 사용한 프로펠러형 수중믹서의 유동해석 | 한국생산기술연구원 에너지·환경기술 추계학술대회 | | 14-19 | |
| 7 | Young-Seok Choi | 1999 | A Study on the Control Method of Ventilating System for High Speed Train in a Tunnel | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 323-328 | ▷ |
| 6 | Young-Seok Choi, Jae-Hyeok Shim, Shin-Hyoung Kang | 1998 | Performance Prediction of Centrifugal Pumps using a Two Zone Model | The Korean Society for Fluid Mechanics (KSFM) Conference | | 33-41 | ▷ |
| 5 | K. H. Kim, H. R. Kim, Young-Seok Choi | 1998 | 익형송풍기 단체규격 | The Korean Society for Fluid Mechanics (KSFM) Conference | | 82-110 | |
| 4 | Jae-Ho Yun, Moon-Soo Park, Seung-Sang Park, Young-Seok Choi, Jong-Hyeon Peck | 1998 | Development of High Performance Aluminum Unit Cooler | The Society of Air-Conditioning and Refrigerating Engineers of Korea (SAREK) Summer Conference | | 1363-1369 | ▷ |
| 3 | Young-Seok Choi, Shin-Hyoung Kang | 1995 | Secondary Flows through an Impeller of Centrifugal Compressor at Design and Off-design Conditions | The Korean Society of Mechanical Engineers (KSME) Fall Conference | | | ▷ |
| 2 | Shin-Hyoung Kang, Young-Seok Choi | 1994 | Calculation of 3-Dimensional Flow through an Impeller of Centrifugal Compressor | 전산유체역학분과회 학술대회논문집 | | | ▷ |
| 1 | Shin-Hyoung Kang, Young-Seok Choi | 1991 | Numerical Study on Turbulent Flow in a Diffuser | 터보동력기계연구센터 학술대회(제1회)논문집 | | | ▷ |
Ph.D. Young-Seok Choi's Lab 